CCX®
Next-Generation GCCM for Canal Lining and Large Infrastructure
CCX® is our next-generation GCCM for lining large, uniformly profiled infrastructure, delivering erosion protection and reduced seepage losses. Ideal for large bulk water infrastructure such as irrigation canals, stormwater drainage, spillways and hydro-electric flumes, CCX® can also be used for surface protection of earthen structures and geomembranes.
Available in 2 variants: CCX-MAT® (CCX-M®) and CCX-UTILITY® (CCX-U®).
User Benefits
Rapid Installation
CCX® is quick to install and can be put into service 24 hours from hydration, maximizing installation volumes during valuable shutdown periods.
Reduced Seepage
CCX-M® has an integrated LLDPE backing reducing water seepage losses whilst accommodating differential ground movement.
Composite Solution
CCX® combines the low permeability of a geomembrane with the protection and durability of concrete.
Logistical Footprint
At 2.7-3.2 lb/ft², CCX® is over 10x lighter per unit area than conventional concrete, cutting transport, cost and carbon.
About CCX-M®
CCX-MAT® (CCX-M®) has a 12 mil LLDPE backing to ensure the material has very low permeability. The composite concrete top cover provides a high degree of long-term durability and can accommodate a high level of differential ground movement due to the fibre reinforcement imbedded within its structure. This limits crack propagation while retaining low levels of permeability. As a result, CCX-M® is the ideal solution for the lining and remediation of channels and irrigation canals, increasing their operational life and reducing water seepage losses. Jointing of CCX-M® is typically through a combination of screws, or screws and sealant or thermal bonding.
About CCX-U®
CCX-UTILITY® (CCX-U®) is manufactured without an LLDPE geomembrane backing for applications where permeability is not critical. While unsuitable for hydraulic applications such as channels, it may be used to line uniformly profiled slopes, for example where erosion protection is required to counteract wind or rain acting directly on the slope only. CCX-U® can also be used to provide surface protection of geomembranes, providing hard armour protection from impact damage and weathering. CCX-U® can be jointed with screws and/or thermal bonding.
Product Specifications
CCX® is supplied in standard Bulk Rolls or half rolls, with roll coverage varying by type.
| Thickness (mil) | 390 |
|---|---|
| Roll Width (ft) | 6.4 |
| Mass per Unit Area (lb/ft²) | 2.7-3.2 |
| Bulk Roll Coverage (ft) | 1050 |
| Bulk Roll Length (ft²) | 164 |
Useful Resources
Featured Videos
CCX® unrolls fast for canal lining, reducing seepage and protecting canals, waterways & hydraulic infrastructure
Watch the CCX® three-point bend test used to determine the strength and stiffness under ASTM D8058 standards
Watch the CCX® maintenance video for guidance on inspection, repair and upkeep for long-term performance
28,000ft² of CCX-M® installed in Dos Palos, California, delivering durable canal lining and 96% water loss reduction
CCX-M® lined a half-mile irrigation canal in Socorro, New Mexico, USA, delivering a fast, durable and low-carbon solution
SMRID lined 400m (1,300ft) of the North Burdett canal in Alberta, Canada, with CCX-M® to cut seepage, cost and time
Real-World Applications
CCX® is ideal for large-scale infrastructure where water loss prevention and surface protection are essential. It’s commonly used for erosion control, weed suppression and membrane protection. Fast to install and low maintenance, it offers a durable alternative to conventional concrete solutions.
Product Accreditations
FAQs
CCX® is part of a revolutionary new class of construction materials called Geosynthetic Cementitious Composite Mats (GCCMs). It is a flexible, concrete filled geosynthetic which hardens on hydration to form a thin, durable, waterproof and lower carbon alternative to conventional concrete. Essentially, it’s Concrete on a Roll®.
CCX® is unrolled into position and secured in place. The material is then hydrated. There is a 30-minute working window before setting begins, and in 24 hours the material hardens to in-service performance specifications.
CCX-M® is slightly stiffer than Concrete Canvas®, making it more suitable for larger more uniform profiles. CCX-M® has different drape characteristics than Concrete Canvas®, making it less suitable for undulating surfaces.
CCX® is manufactured in our UK production plant using bespoke machinery designed by Concrete Canvas Ltd. The process uses a unique patented method of inserting a cementitious material between two geosynthetic layers and stitched together to form a GCCM. For some CCX® product variants (discussed below), a LLDPE backing is applied to the bottom geotextile.
Based on environmental exposure testing, CCX® has a lifespan in excess of 50 years. For advice on specific climates, chemical conditions and applications please contact Concrete Canvas Ltd.